First Service Guide

The first service on an outboard engine is an important maintenance procedure carried out after the engine has completed its initial running-in period. It is designed to ensure that the engine is operating correctly, that all components have bedded in properly and that any early signs of wear or faults are identified before they develop into more serious problems.

For most modern outboard engines, the first service is generally carried out after 20 hours of operation, depending on the manufacturer’s recommendations however some manufacturers specify a 10-hour first service.

What is carried out during the First Service?

  • Engine oil change – drain the original engine oil, replace the engine oil filter, refill with manufacturer recommended oil.
  • Gearbox oil change – drain the gearbox oil, inspect the oil for contamination, refill with manufacturer recommended oil.
  • Inspect fuel system – fuel pipes and connections, check fuel filter/s, primer bulbs, check for fuel leaks.
  • Inspect cooling system – cooling water tell-tale, water intake grilles, check for blockages or debris.
  • Run diagnostics – provide print out and register service with Manufacturer.
  • Test outboard – idles correctly, gear selection, charging system operation.

What happens if the First Service is not carried out?

  • Potential difficulties with warranty claims if servicing requirements have not been followed.
  • Increased wear on internal engine components.
  • Contaminated engine or gearbox oil.
  • Potential overheating if cooling problems are missed.
  • Fuel leaks or poor engine performance.
  • Small mechanical faults developing into expensive repairs.

To book your outboard engine for it’s First Service please call us on 01475 744555 or email info@clyde-outboard-services.co.uk

Manufacturer’s Owners Manual should always be followed.